So I bought a Gibson Console Grande and I have lots of questions!

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Here's the guitar again (also posted it in another thread):

IMG_1929.jpg

A few things about this Console Grande:

It might have been converted to four legs (all four legs are adjustable) because there's a hole with screw holes but no O-ring in the middle between the two legs on the left.

There's no serial number that I can find, anywhere.

it's a 8+7.

Palm rests were re-chromed (according to the seller).

Electronics seem to be totally original.

Pot numbers coming below...
You do not have the required permissions to view the files attached to this post.
User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Pics of leftmost pot:

IMG_1936.jpg
IMG_1937.jpg
IMG_1938.jpg

Serial number reads:

MEG B 2150566 - IRC and Omega greek letter - 803
You do not have the required permissions to view the files attached to this post.
Last edited by Jimmy St-Germain on 13 Mar 2026 2:03 pm, edited 1 time in total.
User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Pics of middle pot:

IMG_1941.jpg
IMG_1940.jpg
IMG_1939.jpg

Serial number reads:

0.5 MEG B 2150566 - rest is hidden by wire and solder
You do not have the required permissions to view the files attached to this post.
User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Pics of rightmost pot:

IMG_1945.jpg
IMG_1946.jpg
IMG_1947.jpg

Serial number reads:

0.5 MEG B 2150566 - IRC and Omega greek letter - 803
You do not have the required permissions to view the files attached to this post.
User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Question:

Can we approximate a date of manufacture just by pot numbers alone?
User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Now with the case...

Of all the Console Grande cases I've seen on the web so far, mine seems to be a bit unique and, at the same time, a genuine Gibson case.

IMG_1952.jpg
IMG_1950.jpg
IMG_1949.jpg
IMG_1948.jpg

It has no Gibson plaque but it has the same arrangement inside as usual Console Grande cases. The color inside is a faded military green.

The case has the same covering as the Gibson GA-25 amp that was available from 1947 to 1949, as you can see:

GA25.jpg

Question: is this an original Gibson Console Grande case?
You do not have the required permissions to view the files attached to this post.
User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Finally, a bit of trivia:

The shop I bought it from on eBay tells me that they bought it from Elana James' guitar player when she had the group Elana James and the Continental Two.

That would be Luke Hill.
User avatar
Allan Revich
Posts: 1294
Joined: 2 Nov 2018 7:04 pm
Location: Victoria
State/Province: British Columbia
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Allan Revich »

That’s a really sweet looking instrument. Congratulations! Have you decided on your tunings yet?
Current Tunings:
GBDGBD (open G)
GBDEGBD (G6)

https://papadafoe.com/lap-steel-tuning-database
User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Allan Revich wrote: 13 Mar 2026 4:35 pm That’s a really sweet looking instrument. Congratulations! Have you decided on your tunings yet?
No decision on the tunings yet.

The top neck's lowest tuning peg has a problem (the gear seems stripped) and it has six strings only at the moment.

If I'm not mistaken, the lower neck has the Don Helms tuning (it came that way).

Since the top neck is six-strings only at the moment, I'm thinking of using some open G or open D tuning usually used on ordinary guitars. I don't know what kind of tension the strings can take and maybe I'm totally out of my depth talking tunings at this point!
Glenn Wilde
Posts: 1000
Joined: 4 Oct 2019 7:47 am
Location: California, USA
State/Province: California
Country: United States

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Glenn Wilde »

Those pots are from 1948 to my cyphering, that's a very cool guitar, congrats.
User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Other questions:

Was the four-legs conversion done by Gibson or by the owner?

Did Gibson offer a four-legs conversion at some point?

EDIT: after thinking about it, I think I have an answer to those two questions. Considering my case is made for a four-legs Console, there's a good chance the conversion was made by Gibson, either before or after the sale.

I agree that pots were manufactured in 1948 (third week of); did Gibson at the time have large quantities of pots from the same batch? Meaning, would you have a Console Grande made in December 1948 for example, still with pots from January 1948?
User avatar
Michael Kiese
Posts: 577
Joined: 17 Jul 2023 12:27 pm
Location: Richmond, Virginia (Hometown: Pearl City, HI)
State/Province: Virginia
Country: United States

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Michael Kiese »

Isn’t that the same model Don helms used to record all those old country hits?
Aloha,

Mike K

🤙🏽 🤙🏽 🤙🏽 🌴 🌴 🌴

1935 A22 Rickenbacher Frypan, 1937 S7 Prewar Rickenbacher Bakelite, 1937 S7 Epiphone Electar, 1937 Epiphone Electar, 1940's Post War Rickenbacher Bakelite, 1950 Supro Comet, 1950's Rickenbacher ACE, 1950's Rickenbacher A25 Frypan, 1951 D8 Fender Professional, 1953 T8 Fender Custom, 1957 National New Yorker, 1955 Q8 Fender Stringmaster, 1961 Supro Comet, 1963 Supro Comet, S8 VanderDonck Frypan.
User avatar
Jimmy St-Germain
Posts: 14
Joined: 13 Mar 2026 8:34 am
Location: Laval
State/Province: Quebec
Country: Canada

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Jimmy St-Germain »

Michael Kiese wrote: 14 Mar 2026 7:56 am Isn’t that the same model Don helms used to record all those old country hits?
Yes, possibly same year of manufacture too.
Glenn Wilde
Posts: 1000
Joined: 4 Oct 2019 7:47 am
Location: California, USA
State/Province: California
Country: United States

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Glenn Wilde »

Jimmy St-Germain wrote: 14 Mar 2026 7:14 am Other questions:

Was the four-legs conversion done by Gibson or by the owner?

Did Gibson offer a four-legs conversion at some point?

EDIT: after thinking about it, I think I have an answer to those two questions. Considering my case is made for a four-legs Console, there's a good chance the conversion was made by Gibson, either before or after the sale.

I agree that pots were manufactured in 1948 (third week of); did Gibson at the time have large quantities of pots from the same batch? Meaning, would you have a Console Grande made in December 1948 for example, still with pots from January 1948?
I don't think anybody had a large stash of anything in '48 so I'd be calling that a '48. Manufacturing was still trying to catch up with demand back then, someone probably ordered that guitar and had to wait for it.
Ethan Shaw
Posts: 733
Joined: 24 Jun 2008 4:28 pm
Location: Texas, USA
State/Province: Texas
Country: United States

Re: So I bought a Gibson Console Grande and I have lots of questions!

Post by Ethan Shaw »

That might be Chris Miller's old steel. He and I both played with Elana, but I don't know if he played in that era with her. If that was his, you can see him playing it with Wayne Hancock on Youtube in Wayne's Austin City Limits taping. I've played many gigs with Chris playing that steel, and it sounds great!